![]() ![]() ![]() I am unsure how to sort out the driver for the "Mass Storage Device" error, as I do not know how to reinstall the relevant driver for this as its protected in the operating system. ![]() To test it further I also have a USB External SD and Memory Card device which supports all the SD card formats, and if I plug the card in that, then plug that into the one of the USB Socket it all works fine. I have removed the device under the Device Manager and scanned the hardware so it adds it back, but it just adds again with the same Yellow Exclamation mark and wont load. Strangely I can insert a SD card into the PC, using the adapter and it detects it fine, it even allows me to open the card and read from it, but if I try and write something to it (even the new SD cards) it fails with Write Lock, but the Write Lock is off on all the cards and adapters and I have tried loads of adapters - All the SD cards format fine with or without the adapters on other PCs, (Code 10),, The requested operation was unsuccessful." When I check my Devices on my PC, it reports that a Universal Serial Bus Controller has the "yellow" exclamation mark next to it under Mass Storage Device, when I examine the item in question using properties it reports "This device cannot start. I have NOT installed anything on this PC, since I formatted the SD card last, and I can format the SD card on other PCs with or without the adapter, so I know its not the SD card or adapter, I also tried other new MicroSD cards and get the same issue. I had recently used the Card Reader on my HP PC to format and write data to 64gb MicroSD card in an adapter. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |